Vacuum Lifters

Using the Nemo GRABO is beneficial for any industry that requires the lifting and moving of large or heavy objects. Movers moving wood furniture, floorers working with heavy stone, tilers moving tiles more efficiently, and glass makers installing windows.

The GRABO is perfect for a glass maker.

The tool is ergonomically designed to provide better grip and less fatigue when moving heavy objects. It's an effective vacuum lifter even for dusty, semi-porous or rough surfaces. It works perfectly with glass, wood, ceramic tile, metals and other materials. Just like the Classic version, the powerful vacuum pump and rechargeable battery are hidden in the handle.

Introducing the OTTOVAC by GRABO. The OTTOVAC is a brand new power tool that is going to change the way glaziers move and install glass or any smooth flat surface. It is a portable electric vacuum cup. It presents itself in a traditional pump action style cup, however this sucks onto your material with simply the push of a button, as well as releases pressure with that same button.

This new tool completely removes the pump action that is traditionally needed to gain suction to the cup in addition, it also removes any mistrust on the actual vacuum suction the tool has on your glass because this new tool comes with the revolutionary automatic on / off sensor.

The automatic on / off sensor is built in the tool that tells the vacuum pump to engage suction, and to stop when it reaches sufficient vacuum, careful not to build too much suction and break or “pop" your glass. On the other side of the issue, in the event the tool begins to lose suction or “bleed” the tool will kick back in and regain suction, so you’ll always be in the safe zone for as long as you need it. When the vacuum in the base of the suction cup reaches -55 kPa, the pump will automatically stop after a three-second
delay.

When the vacuum level drops below -55 kPa, the pump will automatically restart, reaching the required pressure during operation. The tool is rated to safely hold up to 200kg/440lbs and is powered by 4 AA batteries.

• lifting capacity Kg. 200,
• suction cups in vulcanized oil-resistant rubber on aluminum support: N°2 diameter 250 mm,
• frame made of high-strength steel with top quality material,
• MANUAL 0-360° rotation with possibility of blocking at 90° increments,
• 0-90° MANUAL tilting with possibility of blocking in horizontal and vertical position,
• single power supply: 380 Volt three-phase 50 Hz or 220 Volt single-phase 50 Hz (to be specified),
• electrical control equipment complete with switch and plug,
• compact and silent electric pump unit, installed on the structure,
• suction filter with transparent bowl and stainless steel filter cartridge,
• double vacuum circuit,
• double safety circuit consisting of two acoustic and visual alarm systems which automatically signal a low degree of vacuum, with autonomous operation with rechargeable batteries, equipped with a 220 Volt single-phase battery charger,
• double safety tank for vacuum reserve, to ensure gripping even in the event of a power failure and with condensation drain,
• n°2 anti-fall non-return valves for vacuum,
• n°2 vacuum gauges with colored and graduated scale to more easily monitor the degree of vacuum,
• suspension hook on which there are holes that allow for different inclinations of the load,
• double central handle on which there are controls for gripping and releasing the material.

•  lifting capacity Kg 400,
•  suction cups in vulcanized anti-oil rubber on aluminum support: N°4 diameter 250 mm,
•  spring plate support to cushion the impact of the suction cup with the load to be lifted,
•  frame made of high-strength steel with top quality material,
•  MANUAL 0-360° rotation with the possibility of blocking at 90° increments,
•  0-90° MANUAL tilting with possibility of blocking in horizontal and vertical position,
•  single power supply: 380 Volt three-phase 50 Hz or 220 Volt single-phase 50 Hz (to be specified),
•  electrical control equipment complete with switch and plug,
•  compact and silent electric pump unit, installed on the structure,
•  suction filter with transparent bowl and stainless steel filter cartridge,
•  double vacuum circuit,
•  double safety circuit consisting of two acoustic and visual alarm systems which automatically signal a low degree of vacuum, with autonomous operation with rechargeable batteries, equipped with a 220 Volt single-phase battery charger,
•  double safety tank for vacuum reserve, to ensure gripping even in the event of a power failure and with condensation drain,
•  n°2 anti-fall non-return valves for vacuum,
•  n°2 vacuum gauges with colored and graduated scale to more easily monitor the degree of vacuum,
•  suspension hook on which there are holes that allow for different inclinations of the load,
•  double central handle on which there are controls for gripping and releasing the material.

•  lifting capacity 400 Kg,
•  suction cups in vulcanized anti-oil rubber on aluminum support: N°4 diameter 300 mm,
•  spring plate support to cushion the impact of the suction cup with the load to be lifted,
•  frame made of high-strength steel with top quality material,
•  MANUAL 0-360° rotation with the possibility of blocking at 90° increments,
•  0-90° ELECTRIC tilt,
•  single power supply: 380 Volt three-phase 50 Hz or 220 Volt single-phase 50 Hz (to be specified)
•  electrical control equipment complete with switch, plug and pendant control panel,
•  compact and silent electric pump unit, installed on the structure,
•  suction vacuum filter with transparent bowl and stainless steel filter cartridge,
•  double vacuum circuit,
•  double safety circuit consisting of two acoustic and visual alarm systems which automatically signal a low degree of vacuum, with autonomous operation with rechargeable batteries, equipped with a 220 Volt single-phase battery charger,
•  double safety tank for vacuum reserve, to ensure gripping even in the event of a power failure and with condensation drain,
•  n°2 anti-fall non-return valves for vacuum,
•  n°2 vacuum gauges with colored and graduated scale to more easily monitor the degree of vacuum,
•  suspension hook on which there are holes that allow for different inclinations of the load,
•  central maneuvering handle,
•  Push-button panel with 3.5 m of cable with material grip and release controls and 0-90° electric tilt.

•  lifting capacity 400 Kg,
•  suction cups in vulcanized anti-oil rubber on aluminum support: N°4 diameter 300 mm,
•  spring plate support to cushion the impact of the suction cup with the load to be lifted,
•  frame made of high-strength steel with top quality material,
•  rotation 0-360° ELECTRIC,
•  0-90° ELECTRIC tilt,
•  single power supply: 380 Volt three-phase 50 Hz or 220 Volt single-phase 50 Hz (to be specified),
•  electrical control equipment complete with switch, plug and pendant control panel,
•  compact and silent electric pump unit, installed on the structure,
•  suction vacuum filter with transparent bowl and stainless steel filter cartridge,
•  double vacuum circuit,
•  double safety circuit consisting of two acoustic and visual alarm systems which automatically signal a low degree of vacuum, with autonomous operation with rechargeable batteries, equipped with a 220 Volt single-phase battery charger,
•  double safety tank for vacuum reserve, to ensure gripping even in the event of a power failure and with condensation drain,,
•  n°2 anti-fall non-return valves for vacuum,
•  n°2 vacuum gauges with colored and graduated scale to more easily monitor the degree of vacuum,
•  suspension hook on which there are holes that allow for different inclinations of the load,
•  central maneuvering handle,
•  Push-button panel with 3.5 m cable with controls for picking up and releasing the material, 0-90° electric tilt and 0-360° electric rotation.