Tornati Forni

Composed of n.01 single heating chamber equipped with n.01 extractable trolley on wheels with manual movement, equipped with:
• no. 01 working table complete with silicone bag, Teflon-coated nets, vacuum valve, tube
and quick couplings with Viton seal
• armored type resistances for heating from above
• heat diffusion fans
• vacuum system complete with n.01 pump of European production and accessories
• n.01 electrical panel complete with SIEMENS PLC programmer equipped with technology
touch screen.
Modular oven with the possibility of subsequently adding a second chamber
of heating for greater production needs.

Composed of n.02 independent heating chambers each equipped with an extractable trolley on wheels with manual movement, equipped with:
• no. 02 independent working plans, complete with silicone bag, Teflon-coated nets, valves
vacuum, pipes and quick couplings with Viton gasket (n.01 plate for each trolley)
• armored resistances for heating from the top of each chamber
• heat diffusion fans
• vacuum system complete with n.01 pump of European production and accessories
• n.01 electrical panel complete with n.02 SIEMENS PLC programmers equipped with technology
touch screen, for the separate management of the two rooms.
Oven with independent chambers which make possible different cooking cycles in the single chambers
chambers to meet the needs of dynamism and versatility of rolling production.

Composed of n.01 heating chamber with useful internal H 200 mm, n.01 independent and totally extractable trolley on wheels with manual movement, equipped with:
• manual and automatic opening system at the end of the cycle to speed up the cooling phase
• pneumatic pistons with safety locking system
• no. 01 working table complete with silicone bag, Teflon-coated nets, vacuum valve, pipe and quick couplings with Viton gasket
• resistances positioned inside quartz tubes for heating from above and additional resistances on the base of the trolley
• heat diffusion fans
• vacuum system complete with n.01 pump of European production and accessories
• n.01 electrical panel complete with SIEMENS PLC programmer equipped with touch screen technology.
Oven with fully extractable trolley to facilitate the operator in loading and preparing the glass. The heating system used allows production versatility of flat glass lamination and small radius curved glass (chamber H useful 200 mm). Possibility of adding a second preparation trolley, complete with silicone bag, tubes and accessories to optimize and speed up the preparation phase. At the end of the cycle, the operator will be able to extract the trolley inside the oven and introduce the new previously prepared trolley, optimizing production times as much as possible.

Composed of n.01 chamber and a lower heating and ventilation section equipped with finned and armored heating elements and forced ventilation system using high-pressure fans which allow an ideal circulation of hot air for optimal control of the lamination process and temperature. Oven equipped with:
• n.02 extractable trolleys on wheels with manual handling with complete working plan
of silicone bag, Teflon-coated nets, vacuum valves, pipes and quick couplings with gasket in
Viton (n.01 top for each trolley)
• finned and armored resistances in AISI stainless steel and positioned high pressure fans
inside the lower heating and ventilation section
• vacuum system complete with n.01 pump of European production and accessories
• high pressure fans for forced cooling
• n.01 electrical panel complete with SIEMENS PLC programmer equipped with touch technology
screen and router for remote assistance
• n.01 support on wheels for n.02 film rolls.
Innovative oven, equipped with rapid heating and cooling. The manual handling of the individual trolleys facilitates the operator in the loading-unloading and glass preparation stages, without the aid of handling mechanisms. Optimal production/consumption ratio.

Composed of n.01 chamber and a lower heating and ventilation section equipped with finned and armored heating elements and forced ventilation system using high-pressure fans which allow an ideal circulation of hot air for optimal control of the lamination process and temperature. Oven equipped with:
• n.01 vertical opening door with manual or automatic pneumatic opening/closing system according to recipe to speed up the cooling phase
• n.04 working plans complete with silicone bags, nets, vacuum valves, pipes and quick couplings with Viton gasket
• finned and armored resistances in AISI stainless steel and high pressure fans positioned inside the lower heating section and ventilation
• vacuum system complete with n.01 pump of European production and accessories
• high pressure fans for forced cooling
• n.01 panel complete with SIEMENS PLC programmer equipped with touch screen technology and router for remote assistance
• n.01 hydraulic lifter for the loading and unloading process of each single work surface
• (each floor is handled individually)
• n.01 support on wheels for n.02 film rolls.
Oven composed of modular elements that make it modifiable over time to meet different production needs. The kiln can be integrated with modules to increase chamber dimensions and relative increase in production, and frame holder racks with empty system for shelf storage and to speed up the glass preparation phase.

Made up of 2 independent chambers with relative HEATING AND VENTILATION SECTIONS, each equipped with finned and armored heating elements and a forced ventilation system using high-pressure fans which allow ideal circulation of hot air for optimal control of the heating process. lamination and temperature:
• n.01 lower chamber for n.02 worktops, with relative LOWER HEATING AND VENTILATION SECTION
• n.01 upper chamber for n.02 worktops, with related UPPER HEATING AND VENTILATION SECTION
• n.01 lower section on the ground, equipped with a rack with guides for the storage of n.02 worktops.
Oven equipped with:
• n.02 vertical opening doors with manual or automatic pneumatic opening/closing system according to recipe to speed up the cooling phase
• n.04 working plans complete with silicone bags, nets, vacuum valves, pipes and quick couplings with Viton gasket
• finned and armored resistances in AISI stainless steel and high pressure fans positioned inside the upper and lower sections of heating and ventilation
• vacuum system complete with n.02 pumps of European production and accessories
• high pressure fans for forced cooling
• n.01 panel complete with n.02 SIEMENS PLC programmers for the separate management of the two rooms equipped with touch screen technology and remote assistance router
• n.01 hydraulic lifter for the loading and unloading process of each single work surface
• (each floor is handled individually)
• n.01 support on wheels for n.02 film rolls.
Oven composed of modular elements that make it modifiable over time. The two independent chambers make it possible to carry out different cooking cycles in the single chambers, to meet the needs of production dynamism and versatility. The rapid heating and cooling system, in addition to the use of frames in the storage section, optimize the entire production cycle in the best possible way and make it the optimal choice in terms of versatility and productivity.

Composed of n.02 fixed bases, n.01 chamber sliding on rails, equipped with front and rear door, and an upper heating and ventilation section equipped with finned and armored heating elements and forced ventilation system using high pressure fans which allow an ideal circulation of hot air for optimal control of the lamination process and temperature.
Oven equipped with:
• n.01 front door and n.01 rear door with manual opening
• n.02 fixed bases equipped with n.02 working shelves (n.01 fixed upper shelf and n.01 mobile lower shelf on wheels) complete with bags silicones, nets, vacuum valves, pipes and quick couplings with Viton seal. The lower shelf can be moved manually to facilitate the loading and unloading phases, while the upper shelf can be removed to work on the lower curved glass shelf (useful H 700 mm c.a.)
• finned and armored resistances in AISI stainless steel and high pressure fans positioned inside the upper heating section and ventilation
• vacuum system complete with n.01 pump of European production and accessories
• n.01 panel complete with SIEMENS PLC programmer equipped with touch screen technology and router for remote assistance
• n.01 support on wheels for n.02 film rolls.
Oven made up of modular elements that make it modifiable over time to meet different production needs. Available starting from the basic version with two manually operated shelves, which can be integrated with bases, additional shelves and racks for frames, up to the complete version with automatic recipe handling system, for continuous cycle production, without the aid of the operator.